Fastener Specifications
WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bolt - J64 (Front) | |
|
150 N.m (111 lb ft) |
|
30 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bracket Bolt - J55 (Front) | 175 N.m (129 lb ft) |
| Brake Caliper Bracket Bolt - J55 (Rear) | 170 N.m (125 lb ft) |
| Brake Caliper Bracket Bolt - J64 (Rear) | |
|
100 N.m (74 lb ft) |
|
30 degrees |
| Brake Caliper Guide Pin Bolt - J55 (Front) | 63 N.m (46 lb ft) |
| Brake Caliper Guide Pin Bolt - J55, J64 (Rear) | 27 N.m (20 lb ft) |
| Brake Hose Fitting Bolt - Front and Rear | 40 N.m (30 lb ft) |
| Brake Rotor Bolt - J55 (Front) | 14 N.m (124 lb in) |
| Brake Rotor Bolt - J64 (Front) | 7 N.m (62 lb in) |
| Brake Rotor Bolt - J55, J64 (Rear) | 7 N.m (62 lb in) |