Diagnostic Aids

Check for Preliminary information or Technical Service bulletins before programming.
During programming you may be required to select multiple calibrations dependent upon vehicle equipment. Have the vehicle build/RPO information available during the following procedure to ensure the correct calibrations are selected.
Dependent upon the current software level of the module, or the release of updates, USB programming may not be required when replacing/reprogramming the control module. If USB files for the application are not available via SPS, or have not been received from General Motors in another manner of distribution, the USB update process will not need to be performed.
Begin with the vehicle in the vehicle OFF power mode. The Service Programming System will power mode the vehicle.