Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Engine Coolant Air Bleed Pipe O-Ring Seal |
| Engine Coolant Manifold Gasket |
| Engine Coolant Thermostat Housing Seal |
| Thermostat Housing Gasket |
| Water Pump Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Coolant Heater (L83, L86) | 50N.m (37 lb ft) |
| Engine Coolant Fan Rear Fan Shroud Bolt (L83, L86) | 7N.m (62 lb in) |
| Engine Coolant Manifold Fastener (L83, L86) | 25N.m (18 lb ft) |
| Radiator Upper Mount Bracket Bolt (L83, L86) | 25N.m (18 lb ft) |
| Surge Tank Bolt (L83, L86) | 10N.m (89 lb in) |
| Surge Tank Nut (L83, L86) | 10N.m (89 lb in) |
| Thermostat Housing Bolt (L83, L86) | 10N.m (89 lb in) |
| Water Pump Bolt (L83, L86) | 10N.m (89 lb in) |