Removal Procedure
WARNING: This page is about a different car, the 2023 GMC Hummer EV. However, it is still accessible from the selected car via links, so may be relevant.
Tire Repair Sealer and Tire Air Compressor Retainer (1) - Remove
- Tire Air Compressor (2) - Remove
Rear Floor Mat (1) - Remove
Move the front seat to access the retainers.
- Front Floor Console Bolt Access Hole Cover (1) - Remove
- Front Floor Console Rear Cover Bolt (2) - Remove
Move the front seat to access the retainers.
- Front Floor Console Bolt Access Hole Cover (1) - Remove
- Front Floor Console Rear Cover Bolt (2) - Remove
Open the armrest cover.
- Release the retainers with a suitable plastic trim tool.
- Front Floor Console Rear Trim Plate (1) - Remove
- Front Floor Console Rear Cover Bolt (2) - Remove [2x]
Release the retainers with a suitable plastic trim tool.
- Reposition the component to access the electrical connectors.
- Disconnect the electrical connectors.
- Front Floor Console Rear Trim Panel (1) - Remove
Disconnect the electrical connectors.
- UHF Short Range Low Energy Remote Control Access Transceiver Bolt (1) - Remove [2x]
- UHF Short Range Low Energy Remote Control Access Transceiver (2) - Remove
NOTE:
Use a flat bladed plastic trim tool.
NOTE:
Use a flat bladed plastic trim tool.