Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 GMC Yukon XL, 2020 GMC Yukon, 2020 Chevrolet Tahoe, 2020 Chevrolet Suburban, and 2020 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

Position the power steering control module wiring harness to the electric belt drive rack and pinion steering gear.
Courtesy of GENERAL MOTORS COMPANY

Connect the power steering control module wiring harness (1) at the electric belt drive rack and pinion steering gear.

NOTE:

Ensure the position and orientation of each wiring harness retaining clips before securing them.

Install the 3 power steering control module wiring harness retaining clips (2) at the electric belt drive rack and pinion steering gear.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Ensure the position and orientation of each wiring harness retaining clips before securing them.

Install the 3 power steering control module wiring harness retaining clips (1) at the front frame crossmember.
Courtesy of GENERAL MOTORS COMPANY

Connect the power steering control module wiring harness (2) at the generator battery control wiring harness (1).
Connect the power steering control module wiring harness (2) at the chassis wiring harness (3).
Steering Gear Skid Shield - Install - Steering Gear Skid Shield Replacement