FixVault
Home › Cadillac › 2021 › CT4 V, RWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Collision/Avoidance › Driver Assistance Systems › Repair Instructions › Image Processing Module Replacement › Installation Procedure

Installation Procedure

  1. GM5475541Courtesy of GENERAL MOTORS COMPANY

    Ensure the retaining tabs are properly aligned.

  2. Image Processing Module (1) - Install
  3. GM5475540Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors.

  4. Secure the retaining tab.
  5. GM5482696Courtesy of GENERAL MOTORS COMPANY

    Rear Window Panel Trim (2) Install

    • With the aid of an assistant, guide the rear window panel trim (1) rearward in the vehicle and downward to clear the speaker system.
    • Ensure the rear window trim panel feet are seated into the rear window sheet metal drain shoe.
  6. Rear Window Panel Trim Retainer (1) - Install [3x]
  7. GM5474407Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  8. Quarter Upper Trim Panel (3) - Install [2x]
    9. CAUTION:

    Refer to Fastener Caution .

  10. Quarter Window Trim Finish Panel Bolt (2) Install and tighten [2x] - Fastener Specifications
  11. Quarter Window Trim Finish Panel Bolt Cap - Install [2x]
  12. Enable the SIR System. SIR Disabling and Enabling .
  13. Perform the necessary programming and setup procedure: Control Module References
About FixVault