Fastener Specifications
Rear Suspension Adjust Link
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear Suspension Link Inner Nut | - | - | First Pass: 70 N.m (52 lb ft) Final Pass: 90 - 100 degrees |
Rear Toe Adjustment |
| 2 | Rear Suspension Link Inner Bolt | Yes | - | - | Rear Suspension Adjust Link Replacement |
Rear Suspension Lower Control Arm
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Rear Suspension Lower Control Arm Inner Nut | - | - | First Pass: 150 N.m (111 lb ft) Final Pass: 90 - 105 degrees |
Rear Camber Adjustment |
| 2 | Rear Suspension Lower Control Arm Inner Bolt | Yes | - | - | Rear Suspension Lower Control Arm Replacement |
Steering Linkage Inner Tie Rod Nut
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Steering Linkage Inner Tie Rod Nut | - | - | 80 N.m (59 lb ft) | Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment |
Strut Assembly
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Steering Knuckle Nut [2x] | - | - | First Pass: 150 N.m (111 lb ft) Final Pass: 80 - 95 degrees |
Front Camber Adjustment |
| 2 | Steering Knuckle Bolt [2x] | - | - | - | Strut Assembly Removal and Installation (FE2, FE3 without F55) , or Strut Assembly Removal and Installation (FE3 with F55) |