FixVault
Home › Cadillac › 2021 › CT5 V, 4WD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Collision/Avoidance › Image Display Cameras › Repair Instructions › Video Processing Module Replacement › Installation Procedure

Installation Procedure

  1. GM5338627Courtesy of GENERAL MOTORS COMPANY

    Install the video processing module (1) to the video processing module bracket (3).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Video Processing Module Nut (1) - Install and tighten [ 2x ] 9 N.m (80 lb in)
  3. GM5338605Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors.

  4. Install the video processing module (1) with bracket.
  5. GM5338604Courtesy of GENERAL MOTORS COMPANY

    Video Processing Module Bracket Rear Bolt (2) - Install and tighten 9 N.m (80 lb in)

  6. Video Processing Module Bracket Front Bolt (1) - Install and tighten [ 2x ] 9 N.m (80 lb in)
  7. Radio Speaker Amplifier - Install - Radio Speaker Amplifier Replacement
  8. Perform the necessary programming and setup procedure: Control Module References
About FixVault