FixVault
Home › Cadillac › 2021 › CT5 V, 4WD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Data Communications - Repair Instructions › Repair Instructions › Body Control Module Replacement › Installation Procedure

Installation Procedure

  1. GM5312813Courtesy of GENERAL MOTORS COMPANY

    Install the body control module (1) to the body control module bracket.

  2. GM5312811Courtesy of GENERAL MOTORS COMPANY

    Connect and position the wiring harness.

  3. Body Control Module Bracket (1) - Install
  4. GM5312731Courtesy of GENERAL MOTORS COMPANY

    Close and lock the body control module bracket (2) into the instrument panel lower trim panel insulator.

    5. CAUTION:

    Refer to Fastener Caution .

  5. Body Control Module Bracket Bolt (1) - Install and tighten 2.5 N.m (22 lb in)
  6. Perform the necessary programming and setup procedure: Control Module References
About FixVault