Removal Procedure

Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
Courtesy of GENERAL MOTORS COMPANY

Rear Compartment Floor Stowage Trim Compartment (2) - Remove - Rear Compartment Floor Stowage Trim Compartment Replacement
Courtesy of GENERAL MOTORS COMPANY

Liftgate Sill Garnish Molding (1) - Remove - Liftgate Sill Garnish Molding Replacement
Courtesy of GENERAL MOTORS COMPANY

Luggage Shade (1) - Remove - Luggage Shade Replacement
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Quarter Upper Trim Panel- Right Side (3) - Remove - Quarter Upper Trim Panel Replacement
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Rear Side Door Sill Garnish Molding- Right Side (2) - Remove - Rear Side Door Sill Garnish Molding Replacement
Courtesy of GENERAL MOTORS COMPANY

Cargo Tie Down Loop- Right Side (3) - Remove - Cargo Tie Down Loop Replacement
Courtesy of GENERAL MOTORS COMPANY
NOTE:
- Fold rear seat back cushion forward.
- Left side shown, right side similar.
Use a flat-bladed plastic trim tool to release the right side quarter lower rear trim panel (1) from the right side quarter inner panel.
Disconnect all electrical connectors.
Quarter Lower Rear Trim Panel- Right Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disconnect the trailer lamp control module electrical connector.
Release the plastic retaining tabs on the trailer lamp control module bracket and remove the trailer lamp control module (1) from the vehicle.