Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Electronic Brake Control Module (1) - Install
Fig 1: Electronic Brake Control Module Bolts Tightening Sequence
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Torque-to-Yield Fastener Caution

CAUTION:
Fastener Caution

Electronic Brake Control Module Bolt (1) - Install NEW and tighten in sequence [4x]
1. First Pass: 1.5 N.m (13 lb in)
2. Second Pass: 2.5 N.m (22 lb in)
3. Final Pass: 3.5 N.m (31 lb in)
Courtesy of GENERAL MOTORS COMPANY

Electronic Brake Control Module with Brake Pressure Modulator Valve Assembly (1) - Install - Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement
Reposition and install the radiator surge tank. Radiator Surge Tank Replacement (LGX) , or Radiator Surge Tank Replacement (LSY)
Program the EBCM. Control Module References
Bleed the brake system. Antilock Brake System Automated Bleed
Center the steering angle sensor. Steering Wheel Angle Sensor Centering