Reusable Threaded Fastener Tightening Torque Specifications
Reusable Threaded Fastener Tightening Torque Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Bolt | 58 N.m (43 lb ft) |
| Catalytic Converter Brace Bracket Nut | 22 N.m (16 lb ft) |
| Catalytic Converter Heat Shield Bolt | 9 N.m (80 lb in) |
| Catalytic Converter Heat Shield Bolt (LGX) | 9 N.m (80 lb in) |
| Catalytic Converter Heat Shield Nut | 9 N.m (80 lb in) |
| Catalytic Converter Nut (AWD, FWD) | 22 N.m (16 lb ft) |
| Catalytic Converter Nut @ Exhaust Front Pipe (LGX) | 58 N.m (43 lb ft) |
| Catalytic Converter Nut @ Cylinder Head (LGX) | 46 N.m (34 lb ft) |
| Exhaust Front Pipe Bracket Bolt | 22 N.m (16 lb ft) |
| Exhaust Front Pipe Nut | 22 N.m (16 lb ft) |
| Exhaust Front Underbody Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Exhaust Intermediate Hanger Bolt | 22 N.m (16 lb ft) |
| Exhaust Hanger Bracket Bolt | 58 N.m (43 lb ft) |
| Exhaust Hanger Bracket Nut | 22 N.m (16 lb ft) |
| Exhaust Heat Shield Bolt (Exhaust Intermediate Underbody Heat Shield) | 9 N.m (80 lb in) |
| Exhaust Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Engine Mount Brace Bolt | 22 N.m (16 lb ft) |
| Exhaust Muffler Flange Bracket Bolt | 58 N.m (43 lb ft) |
| Exhaust Muffler Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Exhaust Rear Muffler Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Turbocharger Heat Shield Bolt | 9 N.m (80 lb in) |
| Turbocharger Heat Shield Nut | 9 N.m (80 lb in) |
| Warm Up Three-Way Catalytic Converter Bolt | 22 N.m (16 lb ft) |