Removal Procedure

Remove the oil fill cap.
Courtesy of GENERAL MOTORS COMPANY

Intake Manifold Cover Bolt (1) - Remove
Lift up on the front of the intake manifold cover (2).
Courtesy of GENERAL MOTORS COMPANY

Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (1) - Disconnect [5x]
Wiring Harness (2) - Reposition
Courtesy of GENERAL MOTORS COMPANY

Upper Intake Manifold Cover Nut (1) - Remove [2x]
Radiator Surge Tank Inlet Hose Clip (2) @ Upper Intake Manifold Bracket (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Upper Intake Manifold Cover Nut (1) - Remove [2x]
Upper Intake Manifold Bracket (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disconnect the ignition coil electrical connector.
Ignition Coil Bolt (1) - Remove [2x]
Ignition Coil (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Only replace the faulty spark plug.

Spark Plug (1) - Remove