Removal Procedure
- NOTE:
Left side shown, right side similar.
Front Seat- Left Side and Right Side (2) - Remove [2x] - Front Seat Removal and Installation
Pull away a segment of the front side door weather-strip to clear the edge of the instrument panel fuse block access hole cover (1).
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Fuse Block Access Hole Cover (1) - Remove
Hood Primary Latch Release Cable Handle (1) - Release
- Instrument Panel Knee Bolster Bolt (2) - Remove [4x]
Instrument Panel Knee Bolster (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Applique (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove
- Front Floor Console Extension Bolt (2) - Remove
- Front Floor Console Extension Panel (3) - Remove
- NOTE:
Left side shown, right side similar.
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Side Trim Panel (1) - Remove [2x]
Front Floor Console Bolt (1) - Remove [2x]
- Front Floor Console Retainer Bolt (2) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Applique (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Extension Panel (1) - Remove
Front Floor Console Bolt (1) - Remove [2x]
- Front Floor Console Retainer Bolt (2) - Remove
Disconnect and reposition harness as necessary.
- Remove the front floor console (1) from the vehicle with the aid of an assistant.
Disconnect the electrical connector. (3)
- Vehicle Dynamic Sensor Nut (2) - Remove [2x]
- Vehicle Dynamic Sensor (1) - Remove