FixVault
Home › Cadillac › 2024 › LYRIQ Tech, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry And Remote Functions › Repair Instructions › UHF Low Energy Remote Control Access Sensor Transceiver Replacement - Position 3 › Installation Procedure

Installation Procedure

  1. GM5962642Courtesy of GENERAL MOTORS COMPANY

    UHF Low Energy Remote Control Access Sensor Transceiver (1) - Install

  2. Ensure that the retaining tabs are fully secured.
  3. Connect the electrical connector.
  4. GM5969666Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia (1) - Install

  5. GM5925547Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Front Bumper Fascia Bolt (2) - Install and tighten - Fastener Specifications

  6. GM5925546Courtesy of GENERAL MOTORS COMPANY

    Front Wheelhouse Liner Bolt (1) - Install and tighten [4x] - Fastener Specifications

  7. GM5925545Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  8. Front Wheel Opening Molding Retainer (1) - Install [6x]
  9. Front Wheel Opening Molding (2) - Install
  10. Remove the double layer of masking tape around the perimeter of the painted surfaces.
  11. With a clean towel, use a 50/50 mixture of isopropyl alcohol and clean drinking water to remove any left over adhesive residue from the masking tape.
About FixVault