Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Using a flat bladed plastic trim tool, release the retaining clips.
Front Floor Console Lower Applique - Left Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat bladed plastic trim tool, release the retaining clips.
Front Floor Console Lower Applique - Right Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips and remove the front floor console applique (1).
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Cover Bolt (1) - Remove [4x]
Reposition the component to access the electrical connector.
Disconnect the electrical connector.
Front Floor Console Rear Trim Lower Panel (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat bladed plastic trim tool, release the retaining clips.
Front Floor Console Upper Panel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector.
Theft Deterrent Module Bolt (1) - Remove [2x]
Low Frequency Console Antenna (2) - Remove