| G30 | | 4.4 | 3.3 | C |
| Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation: |
| w/Catalytic Converter add | | 0.4 | | C |
| w/Dual Exhaust add | | 0.4 | | C |
| Combination Procedure: BAND: Remove & Replace: |
| G30, Front | | 0.7 | | A |
| G30, Rear or Both | | 1.7 | | A |
| Combination Procedure: CARRIER PINIONS: Remove & Replace: |
| G30, Both | | 2.7 | | B |
| G30, One,Set | | 2.1 | | B |
| Combination Procedure: CLUTCH PLATES: Remove & Replace: |
| G30, Direct | | 1.1 | | A |
| G30, Forward | | 1.1 | | A |
| G30, Forward & Direct | | 1.5 | | A |
| G30, Intermediate | | 1.1 | | A |
| G30, Intermediate & Direct | | 1.5 | | A |
| Combination Procedure: CONVERTER: Drain & Test: |
| G30 | | 0.2 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| G30 | | 0.3 | | C |
| Combination Procedure: INTERMEDIATE SPRAG: Overhaul: |
| G30 | | 1.5 | | A |
| Combination Procedure: LOW SPRAG: Overhaul: |
| G30 | | 2.5 | | A |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| G30, Front | | 0.2 | | B |
| Combination Procedure: OUTPUT SHAFT: Remove & Replace: |
| G30 | | 2.2 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| G30 | | 0.1 | | C |
| Combination Procedure: TRANS OIL PUMP: Overhaul Removed: |
| G30, Front | | 0.5 | | B |
| Combination Procedure: TRANS OIL PUMP: Remove & Replace: |
| G30, Front | | 0.4 | | B |
| Combination Procedure: TRANS OIL PUMP BUSHINGS & SEAL: Remove & Replace: |
| G30 | | 0.3 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| G30 | | 0.6 | | C |
| Combination Procedure: TRANSMISSION HOUSING: Remove & Replace: |
| G30 | | 2.5 | | A |