All Models

On 4x4, place transfer case in "2H" and free wheeling hub in "FREE", then remove hub cover, snap ring, shims, free wheeling hub body and lock washer. On all models, rotate wheel or hub and tighten nut. On 4x4, tighten nut until wheel locks. On 2 wheel drive, torque nut to 22 ft.lbs. (3 mkg). Loosen nut until it can be turned by fingers, then tighten nut with fingers. No play should be felt at this point. Using an accurate spring tension gauge, adjust nut so starting force is 2.6-4 lbs. (1.2-1.8 kg) on 4x4 or 1.1-2.6 lbs. (.5-1.2 kg) on 2 wheel drive models.