Caster Adjustment
NOTE:
Jounce vehicle several times to settle suspension. Release on down stroke. Check for proper tire pressure, worn steering or suspension components.
- Caster angle may be changed with relocation of 2 washers located between legs of upper control arm. An adjustment kit containing 2 washers is available. One washer is .12" (3 mm) thick and the other is .36" (9 mm) thick.
- When adjusting caster, always use two washers that total .472" (12 mm) thickness, with one washer at each end of locating tube. With thin washer in front, change is plus 1°. With washers reversed, change is minus 1°. Left-to-right side caster angles should be within 2° of each other.