Grind Complete
WARNING: This page is about the Chevy Van G10, 4.3 Z, Automatic, 400/M40, which is a different variant/trim than selected.
Includes: Remove carbon, check surfaces for warpage, reface or replace Valves, resurface Valve Seats and clean Valve Guides. Adjust Valves (where applicable).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| G10,V6,Gas | 12.3 | A | ||
| Additional Procedure: VALVE: Grind Complete: | ||||
| G10,V6,Gas, Where Air Cond interferes add,Left Side or Both | 0.3 | 0.3 | A | |
| Combination Procedure: ROCKER ARM ASSEMBLY: Disassemble & Assemble: Includes: Clean and replace necessary components only. | ||||
| Each | 0.4 | B | ||
| Combination Procedure: ROCKER ARM STUD: Remove & Replace: | ||||
| Each Additional | 0.2 | B | ||
| One | 0.3 | B | ||
| Combination Procedure: VALVE LIFTERS: Remove & Replace: | ||||
| V6, All | 0.4 | B | ||
| Combination Procedure: VALVE LIFTERS (REMOVED): Clean: | ||||
| Each Additional | 0.1 | B | ||
| One | 0.2 | B | ||