Fuel Meter Assembly
- Install new fuel meter-to-throttle body assembly gasket. Match cut out portions of gasket with openings in throttle body assembly.
- Place fuel meter assembly on throttle body. Install fuel meter-to-throttle body retaining screws and washers (screws should be coated with locking compound). Tighten screws to 53 INCH lbs. (6.0 N.m).
- Install new "O" rings on fuel lines. Using a back-up wrench on fuel fittings, tighten fuel line nuts to 20 ft. lbs. (27 N.m). To complete reassembly, reverse disassembly procedure.