FixVault
Home › Chevrolet › 1992 › Beretta Base, 2.2 4, Standard › Repair and Diagnosis › Body & Frame › Power Windows › Removal & Installation › Lock Module › Removal

Lock Module: Removal

  1. Remove door trim panel. See DOOR TRIM PANEL  .
  2. Remove water deflector. See WATER DEFLECTOR  .
  3. Remove rivet securing handle to door inner panel by first center punching a depression in head of rivet, then drilling out rivet using a 3/16" drill bit.
  4. Remove inside remote handle by sliding rearward to disengage tabs on handle from slots in the module assembly.
About FixVault