FixVault
Home › Chevrolet › 1994 › Cavalier Base, 2.2 4 › Repair and Diagnosis › External Pages › Different car › Section 12 (Instrument Panel - Analog) › Testing › Voltmeter Test

Voltmeter Test

WARNING: This page is about a different car, the 1994 Buick Skylark. However, it is still accessible from the selected car via links, so may be relevant.
  1. With ignition switch in RUN position, connect voltmeter between positive and negative terminals of battery. If voltage reading on voltmeter is same as vehicle's voltmeter, vehicle's voltmeter is okay.
  2. If voltage is not consistent with vehicle's voltmeter, check Pink/Black wire and Black wire of IPC connector for open circuit. If wires are okay, replace IPC. See INSTRUMENT PANEL CLUSTER (IPC) R & I  under REMOVAL & INSTALLATION.
About FixVault