FixVault
Home › Chevrolet › 1995 › Lumina APV Van Cargo › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Keyless Entry System - Passive › Transmitter Programming

Transmitter Programming

  1. Move all transmitters out of antenna range. Turn ignition off. Turn front door key lock to unlock position. Press programming switch. Diagnostic light will flash "one" continuously.
  2. Bring first transmitter into antenna range. When transmitter code is stored, diagnostic light will be on continuously. Move first transmitter out of antenna range.
  3. Diagnostic light will flash "two" continuously. Bring second transmitter into antenna range. When transmitter code is stored, diagnostic light will be on continuously. If a third transmitter is to be programmed, repeat step 3).
  4. To exit programming mode, move all transmitters out of antenna range. Open and close a front door. Diagnostic light will turn off, and remain off until a new programming mode is started.
About FixVault