Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Adjuster Plug Lock Nut | 50 (68) |
| Engine Frame-To-Body Bolts | (MD121) 125 (170) |
| Inner Tie Rod-To-Rack | 74 (100) |
| Outer-To-Inner Tie Rod Hex Lock Nut | 52 (71) |
| Pinion & Valve Assembly Lock Nut | 26 (35) |
| Pressure Line Fitting (Hydraulic Union) | 56 (76) |
| Rack & Pinion Mounting Bolt/Nuts | 59 (80) |
| Steering Shaft Lower Coupling Pinch Bolt | 35 (47) |
| Tie Rod End Castle Nut | (MD122) * |
| Wheel Lug Nuts | 100 (136) |
| (MD121) - Install NEW bolts whenever bolts are loosened or removed. | |
| (MD122) - To align cotter pin holes, tighten nut a minimum of 35 ft. lbs. (47 N.m) and a maximum of 52 ft. lbs. (71 N.m). DO NOT back off nut to align cotter pin holes. | |