Left Power Door Lock Does Not Lock Or Unlock
- Disconnect RKE control module connector C2. Connect fused jumper wire between connector C2 terminal "D" (Tan wire) and ground. Keep jumper wire connected for remainder of test. Hold either power door lock switch in LOCK position. If left power door lock motor does not lock, go to next step. If left power door lock motor locks, replace RKE control module.
- Disconnect left front door lock motor connector. Connect a test light between door lock motor connector terminal "A" (Gray wire) and ground. If test light comes on, go to next step. If test light does not come on, repair open circuit in Gray wire.
- Connect a test light between left front door lock motor connector terminals "B" (Tan wire) and "A" (Gray wire). Hold either power door lock switch in LOCK position. If test light comes on, replace left door lock motor. If test light does not come on, repair open circuit in Tan wire.