FixVault
Home › Chevrolet › 1997 › Astro Van Cargo, AWD › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Removal & Installation 4.3L › Ignition System › Distributor › Installation (Procedure A)

Installation (Procedure A)

  1. Align rotor to "#2" mark on distributor body. Guide distributor into place noting alignment of mounting hole in distributor hold down base with hole in intake manifold.
  2. Rotor will rotate 42° clockwise as distributor is installed. If rotor does not align with "#1" mark, remove distributor and reinstall using INSTALLATION (PROCEDURE B). Remaining installation is reverse of removal.
NOTE: If DTC P1345 is present, distributor may be installed incorrectly, and must be reinstalled with Procedure B.
About FixVault