Doors Do Not Lock From Either Transmitter
- Disconnect remote control door lock receiver Black, 16-pin connector C1. Connect fused jumper between remote control door lock receiver terminals "E" (Orange/Black wire) and "R" (Light Blue wire). If doors lock, go to step 2). If doors do not lock, go to step 3).
- Replace remote control door lock receiver. Verify system operation.
- Using a fused jumper wire connected to battery voltage, backprobe remote control door lock receiver connector terminal "A" (Tan wire). If doors lock, go to next step. If doors do not lock, go to step 5).
- Repair open circuit in Light Blue wire between remote control door lock receiver and door lock relay. Verify system operation.
- Replace door lock relay. Verify system operation.