FixVault
Home › Chevrolet › 1998 › Venture Base, Van Cargo Extended › Repair and Diagnosis › Engine Performance › Engine Adjustments › Ignition Timing › Camshaft Retard Offset › Adjusting Retard Offset

Adjusting Retard Offset

  1. Turn ignition off. Slightly loosen distributor hold-down bolt. Start engine. Increase engine speed to more than 1000 RPM.
  2. Using scan tool, monitor Cam Retard Offset. To adjust for a negative reading, rotate distributor counterclockwise. To adjust for a positive reading, rotate distributor clockwise.
  3. Continue to adjust as necessary until zero degrees plus or minus 2 degrees is attained. Turn ignition off. Tighten distributor hold-down bolt to 25 ft. lbs. (34 N.m.). Start engine. Increase engine speed to more than 1000 RPM. Using scan tool, verify camshaft retard offset adjustment.
About FixVault