FixVault
Home › Chevrolet › 2000 › Astro Van Cargo, AWD › Repair and Diagnosis › External Pages › Different car › Section 31 (Seat System) › Repair Instructions › Lumbar Support Cable Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari, 2002 Chevrolet Astro, 2001 GMC Safari, and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lumbar support cable and housing to the bucket seat cushion frame. See Figure.
  2. Install the lumbar support cable to the side of the bucket seat cushion frame. See Figure.
  3. Install the lumbar support cable clip.
  4. Install the bucket seat cushion cover and pad. Refer to Seat Cushion Cover Replacement - Front (YC5 and YC6)  or Seat Cushion Cover Replacement - Front (YC7)  .
  5. Install the lumbar plate to the seat back frame. See Figure.
  6. Snap the corners of the lumbar plate to the seat back frame. See Figure.
  7. Connect the lumbar plate cable (1) to the lumbar plate. See Figure.
  8. Install the seat back cover and pad to the seat back frame. Refer to Seat Back Cover and Pad Replacement (YC5 and YC6)  or Seat Back Cover and Pad Replacement (YC7)  .
  9. Install the bucket seat in the vehicle. Refer to Seat Replacement - Bucket .
About FixVault