Removal & Installation
- Cruise control module is located on left front frame rail, behind bumper. Disconnect negative battery cable. Raise and support vehicle. Remove front bumper left lower deflector. Remove cruise control servo cover. Disconnect cruise control module harness connector. Remove cruise control cable from brake pipe clip. Disconnect cruise control cable from cruise control module. See CRUISE CONTROL CABLE .
- Remove cruise control module bracket bolts. Remove cruise control module and bracket from frame rail. Remove cruise control module-to-bracket bolts, and remove cruise control module from bracket.
- To install, reverse removal procedure. Tighten cruise control module-to-bracket bolts to 40 INCH lbs. (4.5 N.m). Tighten cruise control module bracket top bolts to 89 INCH lbs. (10 N.m), and side bolts to 18 INCH lbs. (2 N.m). Adjust cruise control cable. See CRUISE CONTROL CABLE under ADJUSTMENTS.