Cruise Control Functional Switches

Cruise control functional switches are located on the end of multifunction lever, which also serves as turn signal lever. Functional control switches include a SET button and a sliding main switch with OFF, ON and RESUME/ACCEL positions. Switch functions are described as follows:

1. OFF
   
   System disengages when switch is turned off.
2. ON
   
   System is ready to be set when switch is turned on.
3. RESUME/ACCEL (R/A)
   
   Spring-loaded R/A switch will not initially set cruise speed, but when cruise control has been disengaged by braking, momentarily sliding switch to R/A position will cause cruise control to resume previously set speed. This is the resume function. Accelerate function occurs when switch is held in R/A position. This causes the vehicle to accelerate until switch is released. When released, system maintains new set speed. Also, by quickly pressing and releasing (tapping) this switch, the set speed is "tapped-up" in one MPH increments.
4. SET
   
   Spring-loaded SET button engages cruise control. During engagement, if SET button is pressed and held, vehicle decelerates (cruise control disengages) until button is released. When button is released, cruise control engages and maintains new set speed. Also, by quickly pressing and releasing (tapping) this button, the set speed is "tapped-down" in one MPH increments.