FixVault
Home › Chevrolet › 2000 › Corvette 2D Convertible, Standard › Repair and Diagnosis › Engine Mechanical › Engine Mechanical 5.7L V8 › Engine Oiling › Engine Oil Pressure Sensor And/Or Switch Replacement › Removal Procedure

Removal Procedure

  1. Remove the intake manifold. Refer to INTAKE MANIFOLD .
    G00590497Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine oil pressure (EOP) sensor electrical connector.
    IMPORTANT: Clean the area around the EOP sensor before removal.
    G00590498Courtesy of GENERAL MOTORS CORP.
  3. Remove the EOP sensor.
About FixVault