Removal Procedure
WARNING: This page is about a different car, the 2002 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Turn OFF the ignition switch.
- Remove the front floor kick-up panel (RH). Refer to KICK-UP PANEL REPLACEMENT - FRONT FLOOR .
- Pull up on the BCMs lower mounting tab to release the BCM from the bracket.
- Release the BCMs upper mounting tabs by lifting the BCM out of the slots in the bracket.
- Disconnect the harness connectors from the BCM.
- Remove the BCM from the vehicle.