Code Enable Criteria

PCM will run diagnostic for this DTC under the following conditions:

• No TP, CMP, CKP, ECT sensor or VSS DTCs are set.
• Engine speed is 1000-5000 RPM.
• Engine has been running for a minimum of 30 seconds.
• Throttle angle is more than 15 percent.
• Engine load is more than 40 percent.
• Engine coolant temperature is more than 153°F (60°C).
• Maximum spark retard is less than 15 degrees.
• System voltage is more than 9 volts.

DTC will set when PCM detects a KS signal voltage within calculated average voltage range for at least 10 seconds.