FixVault
Home › Chevrolet › 2000 › Malibu Base › Repair and Diagnosis › Body & Frame › Windows › Power Window System › Removal & Installation › Window Regulator/Motor › Removal & Installation (Front)

Removal & Installation (Front)

  1. Disengage upper door trim panel tabs by pushing rearward on bottom front corner and pushing forward on bottom rear corner. Gently pull on trim panel to disengage top tab. Set trim panel aside.
  2. Remove retaining screw from inside door handle pull cup. Remove power door lock and window switches. See WINDOW & DOOR LOCK SWITCHES  . Remove inside door handle pull cup.
  3. Remove door handle plug to access door trim handle screws. Remove door trim handle screws. To release door trim panel from retainers, gently pry outward, starting at bottom rear corner. Remove door trim panel from vehicle, and set aside.
  4. Remove water deflector. Lower window to access window retaining nuts. Remove window retaining nuts and window. Remove window regulator bolts and rivets. Remove window regulator. To install, reverse removal procedure.
About FixVault