Park Neutral Position Switch: Installation

1. Place the shift shaft in the NEUTRAL position. Align the flats of the shift shaft to the flats in the park/neutral switch.
2. Install the PNP switch mounting bolts and temporarily tighten. Adjust PNP switch. See PARK/NEUTRAL POSITION SWITCH  under ADJUSTMENTS.

Fig 1: Locating PNP Switch Connectors

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing & Installing PNP Attaching Hardware

Courtesy of GENERAL MOTORS CORP.

Fig 3: Removing & Installing PNP Switch

Courtesy of GENERAL MOTORS CORP.