Removal & Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2000 GMC Yukon XL, 2000 GMC Yukon, 2000 GMC Sierra, 2000 Chevrolet Tahoe, and 2000 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Remove right side interior rear quarter trim panel. Disconnect Suspension Control Module (SCM) harness connectors. Remove mounting screw. Slide SCM out of bracket. To install, reverse removal procedure. Connect scan tool to Data Link Connector (DLC). Turn ignition on. Following instructions on scan tool display, recalibrate SDM.