Circuit Description

Mass Airflow (MAF) sensor measures amount of air entering engine during a given time. PCM uses MAF sensor information for fuel delivery calculations. MAF sensor readings during acceleration are much higher than those during deceleration or idle.

PCM calculates what MAF sensor reading should be received from sensor under certain conditions using engine speed (RPM), throttle position, and altitude parameters. When these test conditions are met, PCM will compare its calculated MAF value to actual value received from sensor. DTC will set if detected MAF sensor frequency is greater than 11,500 Hertz (Hz).

For duplication of DTC, ensure engine is running, system voltage is greater than 8 volts, and throttle angle is less than 50 percent.