Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front door lock switch plate from the front door trim panel using a small flat-bladed tool at the front of the power window control switch.
- Disconnect the electrical connector from the front door lock control switch.
- Remove the front door lock control switch (1) from the front door trim panel.
- Remove the front door lock control switch from the front door lock switch plate using a small flat-bladed tool.