Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front door window switch plate from the front door trim panel using a small flat-bladed tool at the front of the power window control plate.
Disconnect the electrical connector from the front door window control switch.
Remove the front door window control switch plate from the front door trim panel.
Remove the front door window control switch (1) from the front door window switch plate using a small flat-bladed tool.

Fig 1: Removing Right Front Power Window Switch (Aztek)
Courtesy of GENERAL MOTORS CORP.