FixVault
Home › Chevrolet › 2000 › Venture Plus › Repair and Diagnosis › External Pages › Different car › Section 563 (Body Front End) › Repair Instructions › Splash Shield Replacement - Engine › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the push-in retainers holding the engine splash to the lower flange of the engine compartment side rail using J 38778  .
    Fig 1: View Of Engine Splash Shield Push-In Retainers
    GM622012Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine splash shield from the lower flange of the engine compartment side rail.
About FixVault