Conditions for Enabling Cruise Control

Vehicle speed must be greater than 25 MPH.

1. OFF
   
   System disengages when switch is turned to OFF position.
2. ON
   
   System is ready to be set when switch is turned to ON position.
3. SET (Set/Coast)
   
   Spring-loaded SET button engages cruise. During engagement, if SET button is pressed and held, vehicle decelerates (cruise disengages) until button is released. When button is released, cruise engages and maintains new set speed. Also, by quickly pressing and releasing (tapping) this button, set speed is "tapped" down in one MPH increments.
4. R/A (Resume/Accelerate)
   
   Spring-loaded R/A switch will not initially set cruise speed, but when cruise has been disengaged by braking, momentarily sliding this switch to R/A position will cause cruise to resume previously set speed. This is resume function. Accelerate function occurs when R/A switch is held in position for more than one second. This causes vehicle to accelerate until switch is released. When released, system maintains new set speed. Also, by quickly pressing and releasing (tapping) this switch, set speed is "tapped" up in one MPH increments.