FixVault
Home › Chevrolet › 2001 › Astro Van Passenger, AWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Body Control Modules › Programming › Powertrain Control Module/Programming On Board › Programming Varification

Programming Varification

  1. With a scan tool, clear DTCs. Then Attempt to start engine.
  2. Repeat Service Programming procedure if engine does not start or operates poorly. Perform following procedures before programming PCM:
    • Ensure PCM and DLC connections are OK.
    • Ensure Techline(R) operating software is up to date.
    • Ensure calibration part number is correct for vehicle.
  3. Attempt to program PCM. If powertrain control module still cannot be programmed properly, replace PCM. See POWERTRAIN CONTROL MODULE  under REMOVAL & INSTALLATION.
About FixVault