FixVault
Home › Chevrolet › 2001 › C3500 HD 6.5 F, Automatic › Repair and Diagnosis (Single Page) › Body & Frame › Seats › Power Seat System › Repair Instructions › Memory Seat Control Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: Memory Seat Control Module
    GM381489Courtesy of GENERAL MOTORS COMPANY
  1. Slide the module in until seated.
    2. Fig 2: Harness Connectors & Memory Module Retaining Screws
    GM378544Courtesy of GENERAL MOTORS COMPANY
  2. Refer to Fastener Notice in Cautions and Notices.

    Install the memory module retaining screws (1).

    Tighten 

    Tighten the screws to 3 N.m (26 lb in).

  3. Connect the harness connectors (2).
  4. Install the seat cushion. Refer to Driver or Passenger Seat Cushion Frame Replacement .
  5. Install the seat trim panel. Refer to Front Seat Trim Panel Replacement .
  6. If you installed a new memory seat, calibrate the seat. Refer to Memory Seat Calibration .
About FixVault