FixVault
Home › Chevrolet › 2001 › C3500 HD 8.1 G, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls - 8.1L - Repair Instructions › Repair Instructions › Knock Sensor 2 Replacement › Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the wiring harness connector from the KS (2).
    3. Fig 1: Locating Knock Sensor 2
    GM20272Courtesy of GENERAL MOTORS COMPANY
  3. Remove the KS (2) from the engine block (1).
About FixVault