FixVault
Home › Chevrolet › 2001 › Impala LS › Repair and Diagnosis › Body & Frame › Door Locks › Power Door Lock System & Trunk Release › Programming › Automatic Door Lock/Unlock Modes › With Scan Tool

With Scan Tool

  1. Connect scan tool. Turn ignition switch to RUN position. Select correct vehicle and model year. At SELECT SYSTEM screen, select BODY.
  2. At APPLICATION MENU screen, select PERSONALIZATION.
  3. At next APPLICATION MENU screen, select SET OPTIONS.
  4. At SET OPTIONS screen, select F1 (automatic door lock mode).
  5. At next APPLICATION MENU screen, select or highlight current mode and press ENTER to turn current mode off.
  6. Select or highlight desired mode. See AUTOMATIC DOOR LOCK/UNLOCK MODES  table.
  7. Press ENTER to select desired mode. Select SAVE OPTIONS. Exit the menu.
About FixVault