Code Enable Criteria

• TP angle is more than 12 percent.
• Engine torque is 40-300 ft. lbs. (55-400 N.m).
• Transmission is not in PARK or NEUTRAL.
• Input shaft speed is more than 1500 RPM.
• DTCs P0106, P0107, P0108, P0121, P0122, P0123, P0716, P0717, P1106, P1107, P1121, P1122, or P1810 are not set.

DTC sets when output shaft speed is less than 150 RPM for 2.5 seconds.