FixVault
Home › Chevrolet › 2001 › Impala LS › Repair and Diagnosis › External Pages › Different car › Section 587 (Wiper System And Washer System) › Repair Instructions › Washer Solvent Container Level Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seal to the washer solvent container, pressing in until fully seated.
  2. Position the washer solvent level sensor to the washer solvent container, pressing in until fully seated.
  3. Connect the washer solvent level sensor electrical connector.
  4. Install the right front fender liner. Refer to FRONT FENDER LINER REPLACEMENT
  5. Fill the washer solvent container with washer solvent.
    Fig 1: Connecting Washer Solvent Level Sensor, Electrical Connector & Seal
    G01830673Courtesy of GENERAL MOTORS CORP.
About FixVault