FixVault
Home › Chevrolet › 2001 › Silverado 1500 HD, 4WD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 4.8L, 5.3L, And 6.0L - Repair Instructions › Repair Instructions › Manifold Absolute Pressure Sensor Replacement › Installation Procedure

Installation Procedure

IMPORTANT:

Lightly coat the MAP sensor seal with clean engine oil before installing the sensor.

    Fig 1: Intake Manifold MAP Sensor
    GM260159Courtesy of GENERAL MOTORS COMPANY
  1. Install the MAP sensor (1). Push the MAP sensor down in order to engage the sensor into the retainer.
    2. Fig 2: View Of Top Engine Cover
    GM665886Courtesy of GENERAL MOTORS COMPANY
  2. Connect the MAP sensor electrical connector.
  3. Refer to FASTENER NOTICE in Cautions and Notices.

    Install the intake manifold sight shield.

    Tighten 

    Tighten the fasteners to 10 N.m (89 lb in).

About FixVault